How to Stick PVC, up until recently this was an almost impossible question to answer. Why so? Largely due to its composition and content of solvent it makes PVC more difficult to stick.
The use of PVC has considerably increased over the last decade; you only have to look at the amount of building plastics supplies that have evolved. In so many of these installations it is far more cosmetically pleasing to stick the PVC rather than affixing with screws.
Conventional adhesives just don’t perform well at all when sticking PVC, for example epoxies are not flexible and just don’t stick to the PVC. Also, the hardeners in epoxies actually burn the PVC as opposed to sticking it. Silicone adhesives have the same problem. The only adhesive type that will perform better at sticking PVC is the cyanacrylate or superglue type but even these are very hit and miss as the majority are diluted with solvents which react with the PVC resulting in a poor bond.
The question of “How to Stick PVC?” is now easier to answer. Use CT1 Adhesive. CT1 adhesive will stick PVC perfectly, But Why? The reason being is that CT1 construction adhesive is a completely new unique adhesive that is a hybrid polymer. CT1 adhesive will therefore act and out perform any conventional adhesive.
Not only will CT1 adhesive stick PVC but it will stick numerous building products, for example wood, stone, lead, glass, rubber, roofing felt and brick, the list is endless! CT1 will also stick these materials in any combination:-
PVC to PVC
PVC to Metal
PVC to Wood
PVC to Stone
The possibilities of CT1 adhesive are hard to imagine but so many people have solved so many problems with CT1. Sticking metal to metal or sticking plastic to metal. CT1 adhesive will remain flexible and is able to withstand heavy movement or vibration.
CT1 contains no solvents so is safe for the user but also will not burn or etch the surface. In many external applications such as sticking PVC the surfaces would always have to be dry. This does not apply to CT1 adhesive as CT1 will even stick PVC and any other material in wet conditions, even underwater.
CT1 comes packed in a standard 290ml cartridge and for very small applications where you only need a few drops our CT1 superfast adhesive is the answer.
NEED TO STICK PVC
REACH FOR CT1 ADHESIVE! © Copyright.