UNIVERSITY TESTS POWER GRAB ‘N’ BOND
An engineering company took our product Power Grab ‘n’ Bond to the polymer research centre in Queens University Belfast to ascertain Power Grab ‘n’ Bonds strength versus traditionally used products used in aircrafts. The test pieces were aluminium top-hat sections of 3mm thickness with a length of 200mm. After the pieces were bonded the load bearing and tensile strength was tested using the Zwick Testing Machine and the results were unprecedented. The bonded area was 2 x 20 x 200 = 8000mm² and the bond strength was 0.67 N/mm² which equates to 543 Kilograms per 20cm². This is actually mind blowing. This incredible adhesive is replacing the need for mechanical fixings.© Copyright.