Construction Adhesive That Replaces Numerous Construction Adhe16 August 2011
C-Tec has developed the ultimate Construction Adhesive that has taken the market by storm. In 2008 after many years of research and development C-Tec were proud to introduce into the market the incredible Power Grab n Bond – a unique Construction Adhesive. What makes this Construction Adhesive so special? Let’s look at what Construction Adhesives are available at the moment.
Firstly there are the one component mastic types of which there are several variations including P.U structural Construction Adhesives all of which are dated in their technology and have disadvantages. For example surfaces have to be dry and for a Construction Adhesive this is a real disadvantage especially in a frequently rainy country. The grab on these Construction Adhesives is poor and in vertical applications has to be supported for 24 hours. They lack flexibility, again a huge disadvantage for a Construction Adhesive especially with an external application when it’s exposed to the elements with considerable expansion and contraction between base materials.
The second type of Construction Adhesives available is the two part adhesive but like its singular one component cousin has many disadvantages. There is a lot of mixing with the two components and if not mixed absolutely correctly the Construction Adhesive will fail. The two part is stronger than the one component but it is very slow to cure and as it has very little initial grab has to be supported with the surfaces completed dry.
To answer the earlier question, What makes Power Grab n Bond the ultimate Construction Adhesive? - Power Grab n Bond is a unique hybrid polymer with no mixing required, it can be applied onto wet surfaces, the initial grab is unprecedented-no support required. A marble slab 300mm x 300mm weighing 10kg would normally require four fixing bolts to affix it onto a vertical substrate, just apply Power Grab n Bond onto the back of the slab and affix it immediately onto the vertical substrate with no sliding and no supports. That’s why it’s the mind blowing best Construction Adhesive there is in the market. Even when cured it’s stronger than the base material, even a sledge hammer will not break the bond.
TRY THE BEST CONSTRUCTION ADHESIVE AVAILABLE: - POWER GRAB N BOND